We use cookies
We use cookies to optimize our website. By continuing to browse the site, you agree to our use of cookies.
Control panel
  • Русский
  • Українська
  • English
  • UAH
  • USD
  • RUB
  • EUR
  • 0-800-307-307 Hotline
  • +38 (044) 392-74-33 Kiev
  • +38 (057) 728-39-00 Kharkiv
  • +38 (056) 794-38-31 Dnipro
  • +38 (032) 229-58-93 Lviv
  • +38 (048) 738-57-70 Odessa
  • +38(093) 170-15-42  Life
  • +38 (067) 400-88-44 Kievstar
  • +1(888)393-24-51  USA, Toll free
  • +44(131)507-01-14  Great Britain
  • +7 (499) 348-28-61 Moscow

4.1.2. SSH connection

To connect via SSH from the console, do the following:
  1. Run the standard command:
    ssh root@xxx.xxx.xxx.xxx

    Instead xxx.xxx.xxx.xxx use Server IP.

  2. When the connection is established, enter root user password.
PuTTY is a free SSH and telnet client. You can download the current version at official website.

To connect over SSH using PuTTY, do the following:

  1. Download and run PuTTY.
  2. Specify connection settings:
    • «Host Name (or IP address)"- instead of XXX.XXX.XXX.XXX please specify Server IP.
    • «Port"- make sure the default port is specified 22.
    • «Connection type"- make sure the switch is set opposite"SSH».
  3. Click "Open».
  4. If a warning is displayed, it means that the server key is not in the PuTTY cache (this is typical for the first connection) or has changed. To connect, click "Yes" or "No»:
    • «Yes"- connect and add the current server key to the PuTTY cache (on subsequent connections, the warning will no longer be displayed until the PuTTY cache is cleared or the server key is changed).
    • «No"- connect without saving the key in the PuTTY cache (the next time you connect, the warning will be displayed again).
    • «Cancellation"- do not connect and do not save the key in the cache.
  5. After connecting, enter your login root and root user password... The password can be entered either manually or by copying and pasting it with the right mouse button.