2.3.13. Access limitation

Site access restriction management is performed in the section "Hosting → My sites → Access limitation»:

To configure access restriction, do the following:

1. Opposite "Default»Set the switch opposite the desired method of restricting access:
   • «Allow access to the site for everyone, block users with the following IPs"- select if you want the site to be accessible from all addresses, except for those specified in the list (they will be returned answer 403).
   • «Deny access to the site for everyone, open access only to the following IPs»- select if you want the site to be accessible only from the addresses specified in the list, and everyone else will receive a 403 response.
2. If your current address should be in the list, use the corresponding buttons:
   • «Add IP to the list" in line "Your IP»- click to add your current IP.
   • «Add the entire network to the list " in line "Your network addresses»- click to add your entire current network (it will include your current IP).
3. In field "List of IP addresses»Add the required addresses to the list. You can add both single addresses and subnets in the format CIDR... For the convenience of the calculation, you can use the tool onlinecalculator.
4. Click "Save».
5. Wait approximately 15-30 minutes for the changes to take effect.