We use cookies
We use cookies to optimize our website. By continuing to browse the site, you agree to our use of cookies.
New design
Control panel
  • Русский
  • Українська
  • English
  • UAH
  • USD
  • RUB
  • EUR
  • 0-800-307-307 Hotline
  • +38 (044) 392-74-33 Kiev
  • +38 (057) 728-39-00 Kharkiv
  • +38 (056) 794-38-31 Dnipro
  • +38 (032) 229-58-93 Lviv
  • +38 (048) 738-57-70 Odessa
  • +38(093) 170-15-42  Life
  • +38 (067) 400-88-44 Kievstar
  • +1(888)393-24-51  USA, Toll free
  • +44(131)507-01-14  Great Britain
  • +7 (499) 348-28-61 Moscow

2.22.3. telnet

telnet is a utility that allows you to connect to network devices using Telnet protocol.

Content:

The utility is usually present in Windows, but is disabled by default.

To turn on telnet, do the following:

  1. Right-click on the "Start"And select"Applications and features»:
  2. Click "Programs and Features»:
  3. Click "Turn Windows features on or off»:
  4. Find in the list "Telnet Client", Check the box next to it and click"OK»:

To take advantage of telnet, do the following:

  1. Openup command line.
  2. Enter the command and press Enter:
    telnet example.com 80

    In the team instead of example.com specify the IP or address of the site to which you want to connect (the address must be specified without http:// or https:// at the beginning and / at the end), and instead of 80 - the port on which the connection should be made:

  3. Wait for the connection results. If the connection is successful, a blank screen will appear:If the connection fails, an error message will be displayed:

To get out of telnet press combination Ctrl+]then enter the command q and press Enter.

To install telnet, do the following:

  1. Openup terminal.
  2. Install the Homebrew package manager if not already installed:
    1. Enter the command and press Enter:
      /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    2. In response to a request Press RETURN to continue or any other key to abort click Enter.
    3. When prompted for a password, enter the password for your account on the device (when entering the password, characters will not be displayed on the screen) and press Enter.
    4. Wait for the installation to complete.
  3. Enter the command and press Enter:
    brew install telnet

  4. Wait for the installation to complete.

To take advantage of telnet, do the following:

  1. Openup terminal.
  2. Enter the command and press Enter:
    telnet example.com 80

    In the team instead of example.com specify the IP or address of the site to which you want to connect (the address must be specified without http:// or https:// at the beginning and / at the end), and instead of 80 - the port on which the connection should be made:

  3. Wait for the connection results. If the connection is successful, the following message will appear:If the connection fails, an error message will be displayed:

To get out of telnet press combination Ctrl+]then enter the command q and press Enter.