Since version 5.7, the translation of WordPress to HTTPS significantly
simplified... You can switch the site to work using a secure protocol in literally one click - WordPress itself will fix the protocol in all
URL... If possible
CMS will handle errors on its own
mixed content.
Attention!
Automatic update URL impossible if URL-addresses of the site are specified in constants. In this case, the protocol will need to be updated manually.
To switch WordPress to HTTPS do the following:
-
Disable redirect to HTTP / HTTPS. This is necessary so that a cyclic redirect does not occur during the configuration process.
-
Go to the section "Tools → Site health» («Tools → Site Health»).
In the report, expand the line “Your site is not using HTTPS» («Your website does not use HTTPS") and press "Switch your site to use HTTPS» («Update your site to use HTTPS»).
Check the site is working.
To perform basic WordPress setup for HTTPS, follow these steps:
-
Disable redirect to HTTP / HTTPS. This is necessary so that a cyclic redirect does not occur during the configuration process.
IN
adminpanels site (not in the hosting control panel) in the section "
Settings → General» («
Settings → General") In addresses (
URL) instead of the protocol
http:// indicate
https://:
Test the site by opening it over HTTPS.
If everything is okay
turnon redirect to HTTPS.
Check the site again.
In most cases, the described actions are enough for the site to work over HTTPS.
Note
In case of problems with HTTPS operation due to errors “Mixed Content»Use instruction.
